Trinnov Amplitude8M Power Amplifier
- Free worldwide shipping
- In stock, ready to ship
The amplification stage features the industry’s lowest-distortion and noise specifications, and what little noise there are remains frequency independent with a Signal to Noise Ratio : >120dB referenced to full power. The importance of this trait cannot be over-estimated in a theater that may have twenty or thirty speakers in a single room. If each of those speakers were producing even a small amount of noise, it would rapidly become noticeable and unacceptable. This scenario never arises with The Amplitude8m .
INTELLIGENT POWER
Our amplifiers use microprocessor control for turn-on delay and feature an automatic AC power recognition and configuration system. The amplifiers not only recognize whether they are hooked up to 117V or 230V nominal power, they automatically self-configure.
The Amplitude8M also incorporates a new “sleep” circuit...
SLEEP CIRCUIT
The Amplitude8m incorporate a new “sleep” circuit.
When the amplifier stays idle for a period of more than 10 minutes, power is removed from the output modules and a front-panel LED begins to flash.
As soon as an input signal is detected again on any channel, normal playback operation resumes instantaneously.
LOWEST NOISE
Like the Amplitude8, the 8m features the industry's lowest-distortion and noise specifications to date. The importance of this trait cannot be over-estimated in a theater that may contain twenty or thirty speakers in a single room. If each of those speakers were producing even a small amount of noise, it would rapidly become noticeable and disruptive. This scenario never arises with The Amplitude8m.
PRISTINE DYNAMIC RENDERING
- Intermodulation Distortion: Less than 0.05%
- Signal to noise ratio: -120 dB referenced to rated output.
- Frequency Response +0, -.5 dB, 5 Hz to 20kHz, load independent
MOVIE EXPERIENCE
Experience audiophile-grade sound reproduction in your home theater with zero background noise during the most quiet scenes of the movie. You also get the finest sound quality and realism on music and movies alike, even at high volumes.
THE CINEMA DESIGNER
The Cinema Designer (TCD) is a powerful online design tool that allows integrators and system designers to create not only technically impeccable cinema designs in a matter of minutes, but also a complete set of support documents and aesthetic room renderings.
Trinnov Altitude processors and Amplitude amplifiers are fully supported in the TCD software, enabling designers to integrate the Altitude in the most complex speaker layouts in a matter of minutes.
TCD integrates Trinnov's exclusive recommendation for speaker placement by default.
SPECIFICATIONS
Audio Power & Gain
- Power Output (8Ω, 20-20kHz 0.05% THD+N): 200 Watts RMS x 8
- Power Output (4Ω, 20-20kHz 0.05% THD+N): 300 Watts RMS x 8
- Gain: 19dB (Test window 18.6 to 19.6dB, centre is 19.1dB)
Audio Performance
- Frequency Response: +0, -0.5 dB, 5 Hz to 20kHz, load independent
- Damping Factor: >800 20Hz to 20kHz
- Signal to noise ratio: -120 dB referenced to rated output
- Crosstalk: < 90dB
- Intermodulation Distortion: Less than 0.05%
Audio Inputs & Outputs
- Input Connectors: 1x Balanced (XLR) per channel
- Input Polarity: Pin 2 +ve, Pin3 -ve (for non-inverting output)
- Input Impedance: 47 kΩ, each phase
- Output Connectors: 1x 5 way binding post per channel
Power Supply
- Power Requirement: 117V / 230V 50/60 Hz AC (auto select)
- Power Consumption: <0.5W Standby, <80W idle, <40W Sleep, Max 2kW
- Power Input: IEC C20
- Mains Fuse: 20A (117V) / 10A (220V) both slow blow
- 12V Trigger: 1x in, 1x out (mini-jack TS)
Weight & Dimensions
- Dimensions (W x H x D) mm, including rack ears: 482 x 132 x 433
- Dimensions (L x H x P) inches, including rack ears: 19” x 5 2/8” x 17”
- Shipping box dimensions (W x H x D) cm: 61 x 61 x 42
- Weight: 29.8kg / 65.5 lbs
- Shipping weight / volume: 36kg / 0.156 M3
Warranty
- Standard Warranty: 5 year
- Transferable: Yes
SHIPPING POLICY:
To ensure that your package is properly delivered and you receive shipment within the time frame we advertise, please make sure your address is fully entered and correct. Use correct abbreviations and have spaces inserted properly, we do not take responsibility for the incorrect information. If the package is returned non-deliverable we will issue a store credit for the net price of your item(s) minus the shipping charge.
If you refuse any shipments from blissfulhoome you will be held responsible for the original shipping charges, plus the cost of returning the package to us. This amount will be deducted from your refund.
If your tracking information states that your package was delivered and you have not received it. You must address this with your postal service. blissfulhoome does not hold any responsibility for packages that state to be delivered. We do not issue a refund for packages that state being delivered.
Shipping from warehouse: 1060 Fulton St, #12, Fresno California 93721, United States.
Our Maximum Handling Time is: 2-3 Business days (MONDAY - FRIDAY)
We provide Standard Shipping, Estimated Delivery: 4 to 6 Business days(MONDAY - FRIDAY)* (in regular seasons)
Standard Shipping Cost: Free